US EPA announced a series of steps that building owners and school administrators should take to reduce exposure to PCBs that may be found in caulk in many buildings constructed or renovated between 1950 and 1978. The agency is also conducting new research to better understand the risks posed by caulk containing PCBs.
This research will guide EPA in making further recommendations on long-term measures to minimize exposure as well as steps to prioritize and carry out actions to remove the caulk to better protect public health. Polychlorinated biphenyls, or PCBs, are man-made chemicals that persist in the environment and were widely used in construction materials and electrical products prior to 1978. PCBs can affect the immune system, reproductive system, nervous system and endocrine system and are potentially cancer-causing if they build up in the body over long periods of time.
The agency has created a website, http://www.epa.gov/pcbsincaulk, with updated information on this issue. Concerned parties can also call an EPA hotline toll free at 1-888-835-5372.
Exposure to these PCBs may occur as a result of their release from the caulk into the air, dust, surrounding surfaces and soil and through direct contact. Although this is a serious issue, the potential presence of PCBs in buildings should not be a cause for alarm. If buildings were erected or renovated between 1950 and 1978, EPA recommends that owners implement steps to minimize exposure to potentially contaminated caulk in the following ways:
· Cleaning air ducts
· Improving ventilation by opening windows and using or installing exhaust fans where possible
· Cleaning frequently to reduce dust and residue inside buildings
· Using a wet or damp cloth or mop to clean surfaces
· Not sweeping with dry brooms and minimizing the use of dusters in areas near potential PCB-containing caulk
· Using vacuums with high efficiency particulate air filters
· Washing hands with soap and water often, particularly before eating and drinking
· Washing children’s toys often
EPA also recommends testing peeling, brittle, cracking or deteriorating caulk directly for the presence of PCBs and removing the caulk if PCBs are present at significant levels. Alternately, the building owner can assume the PCBs are present and proceed directly to remove deteriorating caulk.
Building owners and facility managers should also consider testing to determine if PCB levels in the air exceed EPA’s suggested public health levels. If testing reveals PCBs in the air above these levels, building owners should be especially vigilant in implementing and monitoring ventilation and hygienic practices to minimize exposures.
Owners and managers are encouraged to retest PCB levels in air to determine whether these practices are reducing the potential for PCB exposures. Should these practices not reduce exposure, caulk and other known sources of PCBs should be removed as soon as practicable.